| | |
|
| |
| | |
|
|
|
NPE-G1 Cisco Processing Engine
|
NPE-G1
|
|
Cisco Network Processing Engine G1 - Control processor - 3 ports - EN, Fast EN, Gigabit EN - plug-in module
|
List Price: $15,000.00
Your Price: $4,179.00
You Save: $10,821.00 (72 %)
Detailed Description
|
Width
|
38.5 cm
|
|
Depth
|
28.2 cm
|
|
Height
|
3.6 cm
|
|
Weight
|
1.5 kg
|
|
Device Type
|
Control processor
|
|
Form Factor
|
Plug-in module
|
|
Expansion Slots Total (Free)
|
3 ( 3 ) x GBIC
2 ( 0 ) x memory
1 ( 0 ) x CompactFlash Card
|
|
Interfaces
|
3 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
1 x management - console - RJ-45
1 x management - auxiliary - RJ-45
|
|
Compatible Slots
|
1 x Expansion Slot
|
|
Flash Memory Installed (Max)
|
64 MB ( 256 MB ) - Flash
|
|
Additional Information
|
Item Included:
Two 128MB mem modules (256MB total) for NPE-G1 in 7200 (MEM-NPE-G1-256MB)
Cisco 7200 Compact Flash Disk for NPE-G1, 64 MB Option (MEM-NPE-G1-FLD64)
Provides performance of up to 1 million packets per second (PPS) in Cisco Express Forwarding (CEF) switching (an increase of up to 250 percent over the Cisco 7200 Series Network Processing Engine NPE-400)
Offers three Gigabit Ethernet/Fast Ethernet ports that do not take up bandwidth points
Doubles the amount of available DRAM (to 1 GB)
Eliminates the requirement for an input/output (I/O) controller
Incorporates the functionality (flash memory and auxiliary and console ports) of the I/O controller
Eliminates I/O controller LAN interface bandwidth points
Provides modular processors and the ability to upgrade
Offers improved price performance
Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis
Full-feature I/O controller functionality
Only one port per interface can be used at any one time. For example, for interface Gigabit Ethernet 0/1, either the RJ-45 port can be used or the GBIC port, but not both
A total of three ports on any of the three interfaces (0/1, 0/2, or 0/3) can be used at any one time; for example, 0/1 GBIC, 0/2 GBIC, and 0/3 RJ-45
There are two DRAM memory slots, so 256 MB of memory consists of two 128 MB memory SODIMMs, 512 MB consists of two 256 MB memory SODIMMs, and 1 GB consists of two 512 MB memory SODIMMs. It is necessary to have the same size SODIMM in each memory bank on an NPE-G1
Cisco 7200VXR chassis with an NPE-G1 does not require the use of an I/O controller, an I/O controller can still be used
The NPE-G1 is supported with the following Cisco 7200 Series I/O controller part numbers:
C7200-I/O
C7200-I/O-2FE/E
C7200-I/O-GE+E
The NPE-G1 is supported with all port adapters that can be ordered with the Cisco 7200VXR chassis as of August 1, 2002 except for the following:
PA-4C-E
PA-A2-4T1C-OC3SM
PA-A2-4T1C-T3ATM
PA-A2-4E1XC-OC3SM
PA-A2-4E1XC-E3ATM
PA-MCX-2TE1
PA-MCX-4TE1
PA-MCX-8TE1
PA-SRP-OC12MM
PA-SRP-OC12SMI
PA-SRP-OC12SML
PA-SRP-OC12SMX
PA-MC-STM-1MM
PA-VXA-1TE1-24+
PA-VXA-1TE1-30+
PA-VXB-2TE1+
PA-VXC-2TE1+
|
|
UPC
|
746320574059
|
|
Processors Installed
|
1 x Broadcom BCM1250 700 MHz
|
|
RAM Installed ( Max )
|
256 MB ( 1 GB ) - DDR SDRAM
|
|
Ports Qty
|
3
|
|
Connectivity Technology
|
Wired
|
|
Data Transfer Rate
|
1 Gbps
|
|
Data Link Protocol
|
Ethernet, Fast Ethernet, Gigabit Ethernet
|
|
Remote Management Protocol
|
SNMP, Telnet
|
|
Status Indicators
|
Port status, power, link OK
|
|
Features
|
NAT support, manageable
|
|
Compliant Standards
|
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q
|
|
Compliant Standards
|
FCC Class A certified, CSA, UL, cUL, FCC Part 68
|
|
OS Required
|
Cisco IOS 12.2(4)BW, Cisco IOS 12.1(14)E, Cisco IOS 12.2(15)T, Cisco IOS 12.2(15)B, Cisco IOS 12.3(1), Cisco IOS 12.2(14)S, Cisco IOS 12.3(2)T
|
|
Min Operating Temperature
|
5 °C
|
|
Max Operating Temperature
|
40 °C
|
|
Humidity Range Operating
|
5 - 85%
|
|
Max Altitude Operating
|
4 km
|
|
|
|